What is Acrylic Additive?

A 100% liquid acrylic polymer modifier used as a bonding agent and admixture

What does Acrylic Additive do?

When mixed with Xcel Texture Mix or Xcel Stamp Mix, this 100% proprietary liquid acrylic polymer combines to create an ultra-durable, decorative overlay surface. The special blend of acrylic polymers in Acrylic Additive make stamped and thin section overlayments resist breakdown due to weathering and helps them cure to an extremely tough surface that will not check, crack or break up.

Acts as a bonding agent for thin and stamp overlay systems

Acrylic Additive is also used as a bonding agent for both thin and stamp overlay systems. Applied to a clean, stable concrete substrate, Acrylic Additive creates the ideal mechanical bond for thin and stamp overlay systems.

Coverage*

• When used as bond coat: Approximately 200 square feet per gallon
• When used with sctratch coat: Approximately 2 gallons per 50 pound bag of Texture Mix
• When used with texture mix: Approximately 11/2 gallons per 50 pound bag
• When used with stamp mix: Approximately 1 gallon per 50 pound bag

*May vary depending on surface texture and porosity 

FOR PROFESSIONAL USE ONLY
For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Xcelsurfaces Standard Colors

Custom Tinting Available By Request

Contact Xcel Surfaces – 1(800) 644-9131
3750 W. Indian School Rd.
Phoenix, AZ 85019
Contact On-line

Use these color samples as a general guide only. The color effects produced may differ significantly from those shown on the color chart. A representative test section should be prepared for each individual concrete surface prior to general application. For optimum performance, apply a clear top coat using an Xcel Surfaces clear sealer.