What is Aqua Polyseal?

A single component, waterborne, aliphatic (non-yellowing) polyurethane clear coat. Aqua Polyseal can be used in a two-coat sealer application or as a single coat over Xcel Aqua Polyseal Prepcoat.

What does Aqua Polyseal do?

Designed for high performance uses, where hardness, flexibility, chemical and abrasion resistance are required. The aliphatic backbone of our single component Aqua Polyseal sealer provides excellent UV resistance. The low odor of this product makes it perfect for interior or exterior application.

Easy to apply

Aqua Polyseal sealer can be brushed, roller, or spray applied. Easily cleans up with water.

Application surfaces

Excellent adhesion to concrete, cementitious surfaces

Coverage*

Approximately 200-250 square feet per gallon*
May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY
For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Custom Tinting Available By Request

Contact Xcel Surfaces – 1(800) 644-9131
3750 W. Indian School Rd.
Phoenix, AZ 85019
Contact On-line

Use these color samples as a general guide only. The color effects produced may differ significantly from those shown on the color chart. A representative test section should be prepared for each individual concrete surface prior to general application. For optimum performance, apply a clear top coat using an Xcel Surfaces clear sealer.