Product Index

All product color cards, Technical data sheets & SDS sheets can be found below. Find the information by selecting the specific product information you are looking for.

Jump to Product Selector

Concrete Surfacing Products Overview

TWO TECHNOLOGIES - Your Choice for Beautiful Results

Xcel Surfaces Stamp Overlay Process

Realistic patterns in virtually any texture or color created by embossing skins and imprinting tools.

 

Xcel Surfaces Thin Section Process

Stylish, innovative colored surfaces that can be stenciled or imprinted to mimic an array of other materials like tile, brick and stone. The possibilities are endless!

 
  1. Stable Concrete Substrate
  2. Xcel Bond Coat
  3. Xcel Scratch Coat
  4. Your Choice of Xcel Surface

Xcel Product Selector

All Season Acrylic Additive

What is All Season Acrylic Additive?

A 100% liquid acrylic polymer modifier used as a bonding agent and admixture.

What does All Season Acrylic Additive do?

When mixed with Xcel Texture Mix this 100% proprietary liquid acrylic polymer combines to create an ultra-durable, decorative overlay surface. The special blend of acrylic polymers in Acrylic Additive make thin section overlayments resist breakdown due to weathering and helps them cure to an extremely tough surface that will not check, crack or break up.

Acts as a bonding agent for thin overlay systems

Acrylic Additive is also used as a bonding agent for thin systems. Applied to a clean, stable concrete substrate, All Season Acrylic Additive creates the ideal mechanical bond for thin overlay systems.

Coverage*

When used as bond coat: Approximately 200 square feet per gallon

When used with sctratch coat: Approximately 2 gallons per 50 pound bag of Texture Mix

When used with texture mix: Approximately 1 1/2 gallons per 50 pound bag

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

All Season Acrylic Additive

Acrythane

What is Acrythane Sealer?

A two component, low viscosity acrylic urethane. It is used as a primer or sealer over a varierty of surfaces.

Does Acrythane Sealer do?

U.V. stable for exterior applications, cures rapidly and is easily recoated with both solvent-based and water based polyurethanes. Gives a hard, high gloss surface that offers excellent stain resistance and cleanability. Can also be used as a tie over difficult to adhere to surface such as polyester urethane and solvent based acrylic sealers.

Coverage*

Approximately 200-300 square feet per gallon

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Acrythane

All-Purpose Citrus Cleaner

What is All-Purpose Citrus Cleaner?

All-Purpose Citrus Cleaner is formulated to clean a variety of concrete surfaces including unfinished concrete and decorative overlayments. This all-around, general purpose cleaner will be your favorite for regular maintenance, clean-ups and preparation for decorative surface installations.

What does All-Purpose Citrus Cleaner do?

Cleans any concrete surface…great for sidewalks, walkways, driveways, garages, patios and pool decks, quick clean-ups and deep cleaning preps.

Preps concrete for a better finish.

A well prepared surface is critical to any Xcel coating or overlayment. All-Purpose Citrus Cleaner will help you achieve a clean workable concrete surface.

Easy to handle.

Convenient, 1 gallon resealable bottle makes pouring and handling easy.

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

All-Purpose Citrus Cleaner

Aqua Stain

What is Aqua Stain?

A coloring stain with superb penetration characteristics designed for use on decorative overlayments and concrete surfaces.

What does Aqua Stain do?

Allows you to add decorative coloring combinations to all concrete surfaces. Adds vibrant color to any concrete surface, including decorative overlayments and new or existing concrete. The unique water-borne, acrylic based, penetrating formula, adds color with excellent ultraviolet, abrasion, alkaline, and pollution resistance.

Easy to apply

Aqua Stain can be applied in a one, two or three coat process, using a brush, roller, or spray technique. Available in a variety of colors, including a neutral base for in-the-field custom tinting.

Application surfaces

Excellent adhesion to concrete, cementitious surfaces.

Coverage*

Approximately 200-250 square feet per gallon

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Aqua Stain

Bubblegum Release

What is Bubblegum Release?

A liquid releasing agent with a unique scent of bubblegum. Specially formulated to reduce you installation time and help you create cleaner, more beautiful results in Xcel stamped overlayments.

What does Bubblegum Release Do?

As a bond breaker, Bubblegum Release reduces residue build-up on stamping mats–allowing you to stamp faster with quicker clean ups. Less build-up on tools and expensive mats means extended tool life with fewer dollars invested in your tools.

Reduces overall residue on jobs

Brighter colors, clearer patter definition and more professional results means happier customers and more referrals.

Easy to use

Convienient, 5 gallon resealable pail is easy to handle. Clear, colorless formula won’t modify or dull the colors you want to achieve. Great bubblegum aroma will make this product your favorite. You’ll be tempted to work without a mask butalways use a cartridge type respirator when working with any Xcel products.

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Bubblegum Release

Clear Glaze

What is Clear Glaze Sealer?

This versatile product can be used two ways to save you time and money. When mixed with Xcel Top Coat it makes an excellent translucent tint base, ideal for creating unique color effects on overlayments before sealing. Straight out of the pail it is a light duty water-based acrylic sealer for residential stamped, troweled and stained Xcel overlayments. This quick drying product is specially formulated to save you time on the jobsite.

How is Xcel Clear Glaze used with Xcel staining systems?

When used as a tint base, this flexible material is perfect for adding artistic highlights and deep accents on decorative surfacing.

As a sealer it creates a beautiful sealed surface that is easy to clean Good wear resistance in foot traffic areas; extends the life and beauty of your work. Clear, colorless formula won’t dull or hide the stain highlights you’ve created. Sealed finish resists deep penetration stains. Makes spills and regular cleaning a breeze.

Easy to use

When used as a sealer, use straight out of the pail…no measuring needed. When used as a tint base, mix with Xcel Top Coat and apply with a sponge, ragging or dry brush technique for beautiful effects. No special tools required. Fast and easy to install with a brush, roller or airless sprayer. Dries fast and can be recoated for extra durability. Cleans up quickly with soap and warm water. Convenient 5 gallon and 1 gallon resealable pails are easy to handle.

Coverage*

Approximately 200-250 square feet per gallon

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Clear Glaze

Deep Level Concrete Repair

What is Deep-Level Concrete Repair?

An innovative two-part, polymer modified cement patching material. Part A is our proven Xcel Acrylic Additive. Part B is Deep Level mortar base. When mixed, the two create a remarkably strong concrete repair material. This easy to use product will become your favorite patching material for filling areas up to 1” deep on any clean horizontal concrete surface.

What does Deep-Level Concrete Repair do?

Fills, repairs and levels horizontal surfaces. Our versatile formula can be used to repair low spots, spalls and even joint shoulders for professional results.

Fix problem slabs

When used as a leveling underlayment, you’ll create a surface ideal for Xcel decorative surfacing systems. Works great for tile and stone too!

Waterproof for interior or exterior use

This versatile material is great for interior and exterior concrete repairs. Although it is not intended to be used as a vapor barrier, it has excellent waterproof performance in the wettest repair locations.

Coverage*

Approximately 25 square feet at 1/4” thick

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Deep Level Concrete Repair

EEF Factor

What is EFF Factor?

EFF Factor is a waterborne specialty hybrid emulsion sealer, incorporating proprietary performance enhancing chemistries; designed specifically for concrete and decorative overlayment flooring applications. EFF Factor sealer is low VOC and has excellent water blushing and adhesion characteristics.

What does EFF Factor do?

EFF Factor provides excellent efflorescence resistance as well as chemical, water, and stain resistance on all concrete or decorative overlayment applications. EFF Factor can also be used on masonry surfaces where efflorescence inhibiting is desired.

Easy to apply

EFF Factor two-coat application process can be brush, roller, or spray applied.

Application surfaces

Excellent adhesion to concrete, cementitious surfaces.

Coverage*

Approximately 250 square feet per gallon

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

EEF Factor

Epoxy Crack Treatment

What is Epoxy Crack Treatment?

An innovative concrete crack treatment formulated as a semi-rigid, non-sag gel that gives you more control when making small repairs. It’s easy to install and stays where you want it.

What does Epoxy Crack Treatment do?

Fills and repairs horizontal and vertical non-moving cracks. Control joints, cracks and saw cuts (up to ½” wide), can be easily treated with this durable epoxy filler.

Supports edges

The flexible gel additive in this material helps it bond to smooth and rough surfaces providing added support to edges reducing future cracks.

Insensitive to moisture

Advanced resistance to water allows you to use Epoxy Crack Treatment in the wettest repair locations. (Not for use in underwater repair situations)

Easy to use

Convenient, two-part 22oz. dual cartridge fits standard double plunger epoxy gun for easy installation and added control when filling small cracks.

Coverage*

Approximately 45 linear feet at 1/4” wide x 1/4” deep

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Epoxy Crack Treatment

Grip Slip-Resistant Additive

What is Grip Slip Resistant Additive?

A durable, easy-to-use ceramic bead used as an additive to reduce slippery situations in wet areas or inclines. With Grip you can be confident your jobs are as safe as they are beautiful.

What does Grip Slip Resistant Additive do?

Grip can be used to create a slip resistant surface on most concrete and decorative surfaces.

Added Grip when wet

For pool decks, around fountains, inclined driveways, walkways and patios. Any surface will benefit from a little extra Grip.

Easy on the feet

Unlike sand finishes and other abrasive additives, Grip gives you slip resistant performance without sharp edges. Comfortable enough even for kids feet.

Won’t effect your colors

When used according to directions, Grip won’t modify or dull the colors you want to achieve.

Coverage*

Approximately 1 – 1 1/2 tablespoons per gallon of  Top Coat or Selaer for a lighter grip and 3 oz per gallon of Topcoat or Sealer for a heavier grip.

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Grip Slip-Resistant Additive

Heavy Duty Cleaner and Degreaser

What is Heavy-Duty Cleaner & Degreaser?

This extra strength cleaner is specifically formulated to clean and degrease concrete. Heavy Duty Concrete Cleaner will break down deep stains especially with jobs where degreasing is an issue.

What does Heavy-Duty Cleaner & Degreaser do?

Breaks down grease and oil stains. Unlike most cleaners this heavy duty cleaner penetrates deep to dissolve set-in oil and grease stains.

Preps concrete for a better finish

A well prepared surface is critical to any coating or overlayment. Heavy Duty Cleaner and Degreaser will assure a clean, workable concrete surface and superior adhesion of Xcel products.

Easy to use

Convenient, 1 gallon resealable bottle makes pouring and handling easy.

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Heavy Duty Cleaner and Degreaser

High Gloss Acrylic Sealer

What is High Gloss Acrylic Sealer?

A durable solvent based clear coat sealer, specially formulated to be ultraviolet and water resistant for interior and exterior jobs.

What Does High Gloss Acrylic Sealer do?

Creates an extremely durable surface providing outstanding abrasion and wear resistance; extends the life and beauty of your work. High Gloss Acrylic Sealer does not yellow from the intense UV rays of the sun. Sealed water resistant surface helps prevent moisture penetration.

Produces a beautiful easy to clean surface

Sealed finish resists stains, makes spills and regular cleaning a breeze. Clear, colorless formula won’t modify or dull base colors. Brings out highlights and natural character in decorative overlayments and a variety of other surfaces!

Easy to use

Single component sealer; use straight out of the pail. No measuring or blending needed. No special tools required. Fast and easy to apply with a brush, roller or airless sprayer. Cleans up quickly with any aromatic solvent while the sealer is still wet. Convenient 5 gallon resealable pail is easy to handle.

Coverage*

Approximately 250 square feet per gallon

*May vary depending on surface texture and porosity

NOW LOW ODOR FORMULA.

ALSO AVAILABLE IN 1 GALLONS!

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

High Gloss Acrylic Sealer

SMP 5000

What is SMP 5000?

A proprietary blend of polymers designed for use as an admixture with Stamp mix

What does SMP 5000 do?

Mix with Stamp mix to create extremely strong decorative overlay surfaces. A longer working time enhanced hydration and superior impression transfer from mat to overlay.

Coverage

Mix 1 gallon per 50 lb bag of Stamp mix. 20 to 25 sq ft per bag at 1/4″ thick.

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

SMP 5000

Stamp Mix

What is Stamp Mix?

A stamp overlayment consisting of silica sands, proprietary additives and cement specially formulated for use on any interior/exterior concrete substrate.

What does Stamp Mix do?

When mixed with Xcel SMP 5000, Stamp Mix creates an extremely durable stamped overlay surface. Stamp Mix resists breakdown due to weathering and forms an extremely tough surface (exceeding 5000 psi compressive strength) that will not shrink, check, crack or break up.

User-Friendly

Stamp Mix is easy to trowel and the option of three standard colors to achieve your desired finish surface makes Stamp Mix one of the most user-friendly in the industry. This attention to detail is what makes Xcel Stamp Mix the best choice in quality stamped overlay materials.

Coverage*

Approximately 25-35 square feet per bag at 1/4” thick

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Stamp Mix / Texture Mix Standard Colors

Custom Tinting Available By Request

3750 W. Indian School Rd.
Phoenix, AZ 85019

Contact Xcel Surfaces – 800.644.9131

Contact On-line

Use these color samples as a general guide only. The color effects produced may differ significantly from those shown on the color chart. A representative test section should be prepared for each individual concrete surface prior to general application. For optimum performance, apply a clear top coat using an Xcel Surfaces clear sealer.

Stamp Mix

Texture Mix

What is Texture Mix?

A special blend of graded silica sands, additives and cement formulated for use with Xcel thin section overlayments

What does Texture Mix do?

When mixed with Xcel Acrylic Additive, Texture Mix creates an ultra-durable thin overlay surface (1/16” to 1/8” thick). Texture Mix resists breakdown due to dampness, UV and cures to an extremely tough surface that will not check, crack or break up.

Can be used on a variety of textures

Texture Mix can be used with standard knockdown textures or custom surfaces to realistically simulate stone, tile, slate or anything the imagination can create. Available in 5 standard colors, Texture Mix creates the ideal surface for coloring or staining. This attention to detail is what makes Texture Mix the best choice.

Coverage*

When used as scratch coat: 200 square feet per bag

When used as texture coat: 100 square feet per bag

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Stamp Mix / Texture Mix Standard Colors

Custom Tinting Available By Request

3750 W. Indian School Rd.
Phoenix, AZ 85019

Contact Xcel Surfaces – 800.644.9131

Contact On-line

Use these color samples as a general guide only. The color effects produced may differ significantly from those shown on the color chart. A representative test section should be prepared for each individual concrete surface prior to general application. For optimum performance, apply a clear top coat using an Xcel Surfaces clear sealer.

Texture Mix

Top Coat

Check out our Top Coat IR (heat reflective paint)

What is Top Coat?

A 100% acrylic high solids formulation used as an opaque Top Coat on Xcel decorative overlayments. Top Coat can also be used on masonry finishes such as wall caps and stucco finishes.

What can Top Coat do?

Adds color, style and durability to Xcel decorative overlayments. Top Coat creates a durable, uniform surface that is tough and washable, plus it resists staining and fading.

Makes color matching easy

Available in twelve standard colors, Top Coat also comes in two base colors for custom tinting, which makes matching existing customer colors simple and easy.

Easy to apply

Simple roll or spray application with superior spread rate and hide make Top Coat the best choice for finishing Xcel decorative overlayments.

Coverage*

Approximately 100-125 square feet per gallon

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Xcel Surfaces Standard Colors

Talk to your Distributor about our Custom Tinting

Use these color samples as a general guide only. The color effects produced may differ significantly from those shown on the color chart. A representative test section should be prepared for each individual concrete surface prior to general application. For optimum performance, apply a clear top coat using an Xcel Surfaces clear sealer.

Top Coat

Top Coat IR

What is Top Coat IR?

A low sheen, 100% acrylic formulation incorporating solar reflective and thermal emitting properties significantly reducing coating surface temperatures normally associated with the hot sun.

What can Top Coat IR Do?

Adds color, style and durability to Xcel decorative overlayments. Top Coat creates a durable, uniform surface that is tough and washable, plus it resists staining and fading aslo reducing surface temperatures.

Makes color matching easy

Available in twelve standard colors, which makes matching existing customer colors simple and easy.

Easy to apply

Simple roll or spray application with superior spread rate and hide make Top Coat the best choice for finishing Xcel decorative overlayments.

Coverage*

Approximately 100-125 square feet per gallon

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

Xcelsurfaces Standard Colors

Talk to your Distributor about our Custom Tinting

Use these color samples as a general guide only. The color effects produced may differ significantly from those shown on the color chart. A representative test section should be prepared for each individual concrete surface prior to general application. For optimum performance, apply a clear top coat using an Xcel Surfaces clear sealer.

Top Coat IR

TPG (Travertine Paver Grout)

What is TPG?

Blend of sand, cements and polymers used to lock in concrete pavers.

Coverage*

325-350 sq. ft. per bag when using a typical 6”x12” paver with an average width of 1/8” wide.

*May vary depending on surface texture and porosity

FOR PROFESSIONAL USE ONLY

For more information, refer to the Xcel Surfaces Installation Manual or call 800.644.9131

TPG (Travertine Paver Grout)